Siemens to Bring eHighway Demonstration to California

Siemens has been selected by the South Coast Air Quality Management District (SCAQMD) to install an eHighway system in the proximity of the Ports of Los Angeles and Long Beach, the two largest ports in the U.S. Siemens eHighway is the electrification of select highway lanes via a catenary system which supplies trucks with electric power, similar to how modern day trolleys or streetcars are powered on many city streets, while still offering the same flexibility as diesel trucks. A two-way, one-mile mile catenary system will be installed by Siemens and the system will be demonstrated with different battery-electric and hybrid trucks. The expected result is lower fossil fuel consumption, substantially reduced smog-forming, toxic and CO2 emissions, and lower operating costs. Siemens and the Volvo Group, via its subsidiary Mack Trucks brand, are developing a demonstration vehicle for the project. Siemens also is supplying current collectors, the technology that allows trucks to connect and disconnect from the catenary system at any speed, to local California truck integrators whose vehicles will also be part of the demonstration.

“As the first and second busiest container ports in the U.S., Long Beach and Los Angeles can benefit tremendously from the eHighway system, significantly reducing emissions from commercial trucks that normally contribute to much of the air pollution in this region,” said Matthias Schlelein, president of Siemens Mobility and Logistics division in the U.S. “These intricate logistical hubs need to meet increasing local and global demand for goods, and by improving the transportation systems in and around the Port, we hope to help them meet this demand through the use of sophisticated and innovative electrification technology while at the same time improving the local environmental conditions like air quality.” Schlelein adds, “the economic logic of the eHighway system is very compelling for cities like LA, where many trucks travel a concentrated and relatively short distance. Highly traveled corridors such as this are where we will initially see eHighway being applied.”

“I’m happy to see the Los Angeles region leading the way in bringing cutting edge technology to an increasingly important economic center,” said Los Angeles Councilman Joe Buscaino. “The eHighway project is a great example of how electricity can help power the next generation of transportation systems while also providing cleaner air for our citizens in the process.”

The catenary infrastructure will be installed on the North and South-bound sections of Alameda Street where it intersects with Sepulveda Boulevard in Carson, California. Up to four trucks will be running in the demonstration, making multiple drives per day. Thanks to an innovative current collector the trucks can connect and disconnect from the catenary system at any speed for dynamic power supply directly to the electric engine and for on-board storage. To further ensure the same flexibility as conventional trucks, the eHighway vehicles use an electric drive system, which can be powered either by diesel, compressed natural gas (CNG), battery or other on-board energy source, when driving outside of the catenary lines.

”This project will help us evaluate the feasibility of a zero-emission cargo movement system using overhead catenaries,” said Barry Wallerstein, SCAQMD’s executive officer. “Southern California’s air pollution is so severe that it needs, among other strategies, zero- and near-zero emission goods movement technologies to achieve clean air standards.”

SCAQMD is the air pollution control agency for Orange County and major portions of Los Angeles, San Bernardino and Riverside counties, the most polluted region in the nation. For more than 25 years, its Technology Advancement Office has fostered advanced low- to zero-emission technologies for a wide range of mobile sources, from passenger vehicles to ocean-going ships.

SCAQMD commissioned a report by independent consultancy Gladstein, Neandross & Associates (GNA), which investigated how air quality can be improved, despite increases in drayage traffic between the ports and inland logistic hubs. GNA concluded that catenary hybrid vehicles “can simultaneously address emissions and fuel economy issues while providing operational flexibility at a similar or lower cost of ownership as other zero-emission technologies”. The demonstration project serves the purpose of evaluating the technology, together with the truck manufacturing industry. It is the intention of this demonstration to generate a knowledge base for a potential future extension of the system to commercial applications locally and regionally.

The project installation will begin immediately with infrastructure commissioned and first truck integrated in order to start the one year demo in July 2015.

To learn more about the Siemens ehighway system, please visit http://inr.synapticdigital.com/siemens/ehighway/ or https://www.siemens.com/press/ENUBA-2

The Siemens Infrastructure & Cities Sector, with approximately 90,000 employees, focuses on sustainable technologies for metropolitan areas and their infrastructures. Its offering includes products, systems and solutions for intelligent traffic management, rail-bound transportation, smart grids, energy efficient buildings, and safety and security. The Sector comprises the divisions Building Technologies, Low and Medium Voltage, Mobility and Logistics, Rail Systems and Smart Grid. For more information, visit http://www.siemens.com/infrastructure-cities.

The Siemens Mobility and Logistics Division provides solutions to customers to optimize passenger and freight transport. The division bundles all Siemens business related to management of traffic, transport and logistics. This includes railway automation, infrastructure logistics, intelligent traffic and transport systems, and technologies for developing the infrastructure for electric mobility. For more information, visit www.usa.siemens.com/mobility.

Contacts:

For Journalists:
Siemens Mobility and Logistics, Media Relations
Annie Seiple, 202-316-0219
annie.seiple@siemens.com

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.